8-12mL 15-425 Screw Neck Storage Vial ND15

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Order as individual sample storage vials and closures or as unassembled convenience kits. Unassembled convenience kits saves time during sample preparation. Solid-top convenience kits include matched quantities of vials and screw caps with pre-assembled septa. Open-top convenience kits contain shrink-wrapped vials and separately packaged caps and septa in polybags.

Hole Caps are available in phenolic or polypropylene. Phenolic hole caps are provided without a septa. Polypropylene hole caps are available preassembled with separate septa or without septa. We also feature polypropylene hole closures with bonded septa to provide assurance that the septa will not slip away from the cap while injecting.

Featuring rounded bottoms and a deep thread finish for an extra turn of security for those important jobs, these heavyweights are fully annealed for maximum strength.
The rounded bottom allows for the efficient transfer of heat and easier cleaning. 

Suitable for: 24-400 Screw Neck Vials, 20-60ml EPA VOA TOC Vials
Caps Material: PP
Cap Diameter: 24mm
Caps with Closed-top or with 15mm center hole
Septa Material: Nature PTFE / Nature Silicone
Septa Size: 22*3mm Low Bleeding

15-425 Screw storage vials are suitable for the packaging of various pharmaceutical intermediates, high value-added chemicals, chemical reagents, biological reagents, cosmetics, essences and oils, etc. It is suitable for long-term storage and transportation for products, and has excellent sealing performance.

The screw caps produced by Aijiren can have an opening for the autosampler and standard additions, or they can have a solid top for storing samples. A polypropylene cap and film are also available. These pierceable screw caps are designed for one-time use, and because there are no caps and seals to assemble, the sample preparation time is reduced.

Superior quality 33 expansion borosilicate clear (Type 1, Class A) or 51A amber (Type 1, Class B) glass vials, PTFE-lined solid-top storage caps, PTFE on film/foam backing offers broad chemical resistance, Not autoclavable, Pack of 100

Open top 20ml vial and cap with welded septum ,Pack of 100.
The only low-level certified vials in the market for Total Organic Carbon testing and sampling. Major TOC instrument manufacturers use and recommend these vials.
Vials certified, and ready to use.
Each lot of vials is tested and certified.

Storage Vial is supplied by Aijiren. These vials are pre-sterilized and have a capacity of 5ml. These vials can be used for storing biological material, human and animal cells. The cap is provided with a built-in seal ring which makes the vial leakproof. The base of the vial has longitudinal grooves which gives it a non-twisting character when placed in a vial rack.

Aijiren’s 20ml, 30ml, 40ml, 60ml storage bottle kits include screw cap sample bottles made of type 1 borosilicate clear or brown glass, open caps with PTFE silicone rubber septa, or PTFE lining Storage caps (can withstand various chemical corrosion).

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Storage Vial is supplied by Aijiren. These vials are pre-sterilized and have a capacity of 60ml. These vials can be used for storing biological material, human and animal cells. The cap is provided with a built-in seal ring which makes the vial leakproof. The base of the vial has longitudinal grooves which gives it a non-twisting character when placed in a vial rack.

The manufacturer’s lot number for each component of this product is tracked until all procedures are completed at which time a final lot number is assigned and documented. A randomly selected collection of vials from each completed lot are submitted to an independent validation laboratory for quality control purposes to confirm that the TOC vials comply with the quality specification. The vial, closure and dust cover undergo comply with stringent quality standards and specifications.

 EPA vials are 24mm screw top and suitable caps are sold separately. 24mm EPA caps are pre-assembled with a variety of septa, to suit a number of different applications. 

15-425 Screw Sample Storage Vials made of high quality borosilicate glass for heating or autoclaving, instant syringe access to completely sealed reagents and standards. Aijiren Sample Storage Vials are available in two sizes for storage, heating and autoclaving.

We provide the protection of PTFE and the resealing ability of silicone with our septa and seals to fit our autosampler crimp top vials. This seal includes a two sided PTFE septa with silicone in the center. Caps are made of high quality polypropylene, Caps have the profile of a crimp or snap closure for compatibility with robotic autosamplers, Pre-assembled septa reduces the chance of contamination during sample preparation, while saving sample preparation time in the lab.

Order as individual sample storage vials and closures or as unassembled convenience kits.
Unassembled convenience kits saves time during sample preparation.

Solid-top convenience kits include matched quantities of vials and screw caps with pre-assembled septa.
Open-top convenience kits contain shrink-wrapped vials and separately packaged caps and septa in polybags.

The flat bottom profile can keep stable standing, and reduced sprinkle. Borosilicate glass is used as main material to enhance corrosion and temperature resistance. Superior quality with a favorable price is worthy of your order and more and cheaper.

Benefits of Qorpak TOC Vials
• Vials are certified and traceable; documentation is provided for GMP
• High Level Quality Control and Process Control for lower TOC background
• Consistently lower levels of background TOC for statistical studies
• 100-pack slotted case can be used in clean room applications
• 20 ml vial can be used in most TOC autosamplers
• Individual “Bar Code” stickers can be provided separately for identification purposes

Storage glassware manufactured in Type 1, Class A, 33 expansion borosilicate glass or 51A amber glass
Capacity ranges from 20 to 40mL
Provide constant pH for duration of sample storage life
Chemically inert caps suitable for most chromatography and storage applications
Top grade PTFE/silicone septa used for cleanliness

Storage glass ware manufactured in Type 1, Class A, 33 expansion borosilicate glass or 51A amber glass
Capacity ranges from 8mL to 12mL
Provide constant pH for duration of sample storage life
Chemically inert caps suitable for most chromatography and storage applications
Top grade PTFE/silicone septa used for cleanliness

Order as individual sample storage vials and closures or as unassembled convenience kits.
Unassembled convenience kits saves time during sample preparation.
Solid-top convenience kits include matched quantities of vials and screw caps with pre-assembled septa.
Open-top convenience kits contain shrink-wrapped vials and separately packaged caps and septa in polybags.