Chromatogarphy instrument

Headspace vials and closures must form a tight seal for accurate analysis with reproducible results. Available in clear or amber Type I borosilicate glass with crimp or screw thread finishes. The vials are used to heat the sample until the concentration of the liquid and gas phases are in equilibrium. A sample is then taken from the gas phase (headspace) for analysis.

Aijiren headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

Finally, the gas in the vial enters the gas phase detection. Top space gas analysis with the help of a headspace vial helps automate quality control or sample selection. Using modern instruments, through highly reproducible samples, the entire experiment can be prepared for analysis in an accurate manner.

Headspace Vials and Closures from Aijiren. Aijiren Technologies headspace vials and closures are engineered to prevent sample contamination and ensure accurate analysis. They are available in a range of sizes and glass types. Choice of 10ml or 20ml vials; Bevelled top for maximum level of seal security.

Aijiren Tech headspace vials are manufactured to provide uniform glass thickness which insures even heat distribution for consistent sampling reliability. All Aijiren Tech headspace vials meet or exceed OEM instrument manufacturer’s specifications.Aijiren Tech vials are available in 10ml, 20ml versions with Screw type.

Headspace vials are available in clear or amber glass with a round or flat base, with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

Aijiren Tech crimp top headspace vials are available in a flat or round bottom style, with clear or amber glass. Headspace closures are available in pre-assembled caps with septums or can be ordered individually. Pressure release, seal with lining, and seal with magnetic lining are also optional.

The material of Headspace Vials is low extractable Borosilicate glass with low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance and high chemical stability. Headspace Vials suitable for headspace analysis of volatile solids and gases.

Aijiren Tech headspace vials are manufactured to provide uniform glass thickness which insures even heat distribution for consistent sampling reliability. All Aijiren Tech headspace vials meet or exceed OEM instrument manufacturer’s specifications.Aijiren Tech vials are available in 6ml, 10ml, 20ml versions with Screw type.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Screw-top Vials and caps are easy to use and require no special tools. The unique thread design provides a consistently secure seal, preventing evaporation. Screw Thread Vials are available in 8-425 (8mm) neck finishes.

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Amber glass vials are available in 2 ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

Clear Glass Screw Thread Vials are 2mL, 12x32mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time.

Aijiren’s 13mm Screw Vial is paired with quality PP Screw Caps, especially 13mm screw caps. The special angular design makes it very different from other pp caps. This is Aijiren’s new design product recently. If you are interested, you can Contact Aijiren.

Glass autosampler vial, 4ml, 15mm x 45mm, with 13-425 screw cap.
Ideal for general laboratory use and sample storage.
Chemically inert caps suitable for most chromatography and storage applications
The finest PTFE/silicon septum used for cleanliness

Red PTFE / white silicone septa + black cap without hole, for 4 ml screw cap vials SV104CS 15×45 mm vials have a 13-425 GPI thread and can hold up to 4 ml of sample. Use the 13 x 425 caps with septa for use as sample vials and with diffusion caps for wash vials. With closed top screw seals, these vials can also be used as storage vials.

Aijiren’s 13-425 uses borosilicate hydrochloric acid glass, which is divided into 5.0 type and 7.0 type. Generally speaking, Amber Glass is 5.0 type. Customers can also choose whether they need a label area or a custom logo.

The 13-425 produced by Aijiren has a size of 15*45mm, and the 13mm black screw pp cap has an 8.5mm center hole. Septa is made of PTFE and Silicone and has a size of 13*1.5mm.

Finally, the gas in the vial enters the gas phase detection. Top space gas analysis with the help of a headspace vial helps automate quality control or sample selection. Using modern instruments, through highly reproducible samples, the entire experiment can be prepared for analysis in an accurate manner.

Headspace Vials and Closures from Aijiren. Aijiren Technologies headspace vials and closures are engineered to prevent sample contamination and ensure accurate analysis. They are available in a range of sizes and glass types. Choice of crimp or screw top vials; Bevelled top for maximum level of seal security.

Aijiren Tech headspace vials are manufactured to provide uniform glass thickness which insures even heat distribution for consistent sampling reliability. All Aijiren Tech headspace vials meet or exceed OEM instrument manufacturer’s specifications.Aijiren Tech vials are available in 10ml, 20ml versions with Screw Top.

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

10ml,22.5ⅹ46mm,20ml,22.5ⅹ75mm, DM18
Material: USP1, Borosilicate Glass
Box packaged tpo minimize sample bottle damage.
Manufactured under strict quality, which ensures dimensional consistency from lot-to-lot
Suitable for headspace analysis of volatile solids and gases.
Store volatile samples to prevent sample evaporation
High temperature resistance and corrosion resistance
Mainly used in gas chromatography analysis for headspace analysis.

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Amber glass vials are available in 2ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

Our 9 mm Wide Mouth Vials and Closures are our recommended screw thread vials. These vials are autosampler compatible and offer a 40% larger opening than 8-425 thread vials, simplifying pipetting and other routine functions. Aijiren Tech offers 9 mm screw thread vials in clear and amber glass, as well as polymeric options and mass spec quality glass.

These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative 9mm closures and 9mm screw top vials for consistent productivity on every separation.
Standard opening screw-thread vials are manufactured from borosilicate glass and have a maximum fill volume of 2 ml.

Snap Cap Vials Wide opening vial is easier to fill and provides a larger target area for the autosampler needle Fit most autosamplers that accommodate the 12x32mm vial format Superior quality 33 expansion borosilicate clear glass Type 1, (Class A) or 51A amber glass Uniformly flat

Aijiren Vials manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B, borosilicate glass
Aijiren Vials have a standard graduated write-on patch for easy filling and identification
Snap caps used with the Aijiren Vial system are a convenient alternative to aluminum seals
Snap caps or aluminum seals ensure a secure seal for samples

Aijiren Vials have a standard 11.6x32mm profile and are compatible with convenient 11mm snap cap or aluminum seal closures
The “Step” design ensures proper centering of limited volume inserts, eliminating missed injections
Aijiren Vials have a 40% larger opening than standard aluminum seal vials for easier sample filling and to reduce the chance of bent or broken needles during sampling

Snap Vials are manufactured from Type 1 borosilicate glass(Class A, 33 expansion borosilicate glass), available in clear or amber, or from Polypropylene. Snap Vials accept both an Aluminum Snap Seal as well as a Polyethylene Snap Cap. Excellent for short term storage. Deactivation, MS Certification is also available.

Snap seal vials are less prone to breakage during decapping because more glass is used in the neck of the vial. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

The standard 11.6x32mm profile is compatible with 11mm aluminum seal closures
For closure selections please see Aluminum Seals.
Silanized glass vials are an excellent solution when protein absorption must be avoided. The silanization process deactivates charged SiOH sites on the glass surface, limiting the hydrophobic effect.

The Aijiren sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

1.Standard vials for GC and HPLC.
2.Vials with integrated Micro-Insert are available.
3.11mm hand crimper & 11mm Decapper.
4.Vials have a 40% larger opening than standard opening aluminum seal vials.
5.Vials are manufactured of Clear or Amber borosilicate glass.
6.The standard 12x32mm profile is compatible with 11mm aluminum seal closures.

2ml Crimp Autosampler Vial with insert is larger and wider mouth than 9mm screw sample vial. 2ml crimp autosampler vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling.

Aijiren 2 mL crimp top vials are constructed from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. Our associated crimp caps and closures come with a choice of etiher PTFE silicone, PTFE only, natural red rubber, butyl, or PTFE butyl materials.

Type 1 borosilicate glass. Clear glass vials with 20mm crimp seal finish are designed to fit most headspace autosamplers. Flat bottom vials maximize heating efficiency when used with bottom. Round bottom vials are more easily handled by robotic arms that lift the vial from the tray.

Headspace Vials & Caps Agilent 20 mL certified screw and crimp style, clear or amber glass headspace vials and associated 20 mm headspace caps are engineered to prevent sample contamination while providing consistent, secure seals.

10ml Crimp Top Headspace Vial has a very good seal and can be used for volatile samples, but it needs to be used with 20mm Hand Crimper to seal the vials, and when opening the lid, it needs to be sealed with 20mm Hand Decrimper.

Aijiren Headspace Vials feature rounded shoulders and bottoms, allowing for even heating and safer operation at higher pressures. The newly designed top provides a tighter seal with your septa. Vials are manufactured from Type I borosilicate glass and accept 20 mm aluminum seals.

Autosampler Vials, Caps and Closures Aijiren 20 mm Headspace Glass Vials Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish.

Using these bottles for sample storage can reduce ion leaching while ensuring that the sample maintains a consistent pH during its lifetime. Thermo Scientific™ National™ and Thermo Scientific™ Chromacol™ sample storage screw-top bottles are made of high-quality 33 expanded borosilicate transparent (type 1, type A) glass or 51A amber (type 1, type B) glass. The storage bottle has a capacity range of 40 mL.

Storage glassware manufactured in Type 1, Class A, 33 expansion borosilicate glass or 51A amber glass
Capacity ranges from 2mL to 40mL
Provide constant pH for duration of sample storage life
Chemically inert caps suitable for most chromatography and storage applications
Top grade PTFE/silicone septa used for cleanliness

Aijiren’s 60mL storage vial kits include screw cap sample vials made of type 1 borosilicate clear or brown glass, open caps with PTFE silicone rubber septa, or PTFE-lined Storage bottle cap (can withstand a variety of chemical corrosion).
Aijiren storage bottle kits are widely used in environmental, food and pharmaceutical fields. Separate vials and cap options can increase application flexibility.

Manufactured in state of the art moulding facility using high purity virgin polypropylene.
PP Material confirming to US FDA 21 CFR.
Used for storage of PCR reagents, enzymes and other diagnostics and biochemical reagents or sample.
HDPE screw closure is leak proof.
Can be used at low temprature.
Amber Storagr Vial can be used for light sensitive samples.

Aijiren Storage vial is an ideal device for general laboratory use and storage of diverse samples due to excellent sealability and chemical tolerance.
Besides, chemically inert caps are a good choice for most chromatography and storage applications. Top grade PTFE or Silicone septa are adopted to ensure cleaning production and consistent quality of sample vials.
The flat bottom profile can keep stable standing, and reduced sprinkle. Borosilicate glass is used as main material to enhance corrosion and temperature resistance. Superior quality with a favorable price is worthy of your order and more and cheaper.

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Amber glass vials are available in 4ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

The Aijiren 15x45mm vials have a 13-425 GPI thread and can hold up to 4ml of sample. Use the 13 x 425 caps with septa for use as sample vials and with diffusion caps for wash vials. With closed top screw seals, these vials can also be used as storage vials.

With13-425 GPI thread and can hold up to 4ml of sample.
• Can be used as wash, waste or storage vials
• The vials are preferentially used on instruments of the following manufacturers: Dionex, Shimadzu(AOC-14/1400, LC-10A and the SIL-2AS), Spark, Varian, VWR (MERCK®)/ Agilent 6850 autosampler tray (G2880A), Perkin-Elmer Autosystem GC, Waters 48 position trayautosampler,etc.
• Clear glass vials–made from USP Type I, Class A, 33 Borosilicate Expansion glass
• Amber glass vials—made from USP Type 1 Class B, 51 Borosilicate Glass.

Glass autosampler vial, 4ml, 15mm x 45mm, used with 13-425 screw caps.
Ideal for general laboratory use and sample storage.
Chemically inert caps suitable for most chromatography and storage applications
Top grade PTFE/silicone septa used for cleanliness

Red PTFE/White silicone septa + Black cap without hole, for 4ml screw top vial SV104CS 15x45mm vials have a 13-425 GPI thread and can hold up to 4ml of sample. Use the 13 x 425 caps with septa for use as sample vials and with diffusion caps for wash vials. With closed top screw seals, these vials can also be used as storage vials.

Some analysis systems use their own processes and components to optimize performance. As a result, fitting the sample vial to the analysis system will completely affect the quality of the expected results. The Aijiren 2ml 9mm HPLC vial has been tested many times and is fully compatible with popular commercially available chromatography analytical instruments.

9mm screw autosampler vial is widely used in laboratory chromatography analysis. Aijiren as one of largest chromatography consumable supplier, supplies 9mm screw HPLC vial in wholesale price. This 9mm screw vial package can reduce screw vial mouth touch to prevent contamination of sample. At the same time, the package box can be used as a vial rock, it is save the cost. Welcome to inquiry us about chromatography consumable.

In the field of experimental consumables, glassware consumables account for 86%. Reagent bottles are widely used for reagent storage and transport, accounting for only 32% of the final glassware. 2ml HPLC vials are widely used in chromatography, accounting for 54% of glassware consumables. This shows that the demand for the 2ml HPLC vial market is very large.

Features:
1) 8mm screw vials can be used with all common autosamplers
2) Standard narrow neck design for GC and HPLC
3) 8mm wide opening that is easy to drill holes

Aijiren Clear 8-425 HPLC Sample Vial, Clear Type 1 Class A, Amber 8-425 HPLC Sample Vial is manufactured in Type 1 Class B Borosilicate Glass, sample identification, measurement values 0.5, 1.0 and 1.5 ml. Consistency between the vial and the true neck 6mm of the standard glass insert is always guaranteed.

The Aijiren 8-425 screw cap and vial are suitable for waters and other rotating or robotic arm samplers. The specifications for the 8-425 HPLC sample vial are 12 x 32 mm. The opening of the 8-425 HPLC sample vial is 40% larger than the standard narrow opening vial, preventing syringe problems. Accurately handle bottlenecks and enable the mechanical arm to operate efficiently. The special screw design ensures a consistent seal.

Too much or too little resistance to the needle can damage the septum, damage the re-sealing, the needle may be clogged by the core ring of the septum material, or the autosampler may be damaged. The Used Aijiren silicone rubber/PTFE septum is designed to give moderate resistance to the autosampler needle during the injection process, so it penetrates correctly into the vial without damaging the septum or injection needle.

Aijiren has its own bottle manufacturing plant. Aijiren strictly controls the manufacture of products and can ensure that the specifications of the 9mm screw neck vials in the same batch are exactly the same. Aijiren also offers customized services. You can add your own logo to Via and specify the color of the cap.

The 9mm screw neck vial is the 9mm screw neck vial, which has the highest sales volume among Aijiren’s HPLC vials, because it can be used with most autosamplers on the market. In addition, the 9mm screw neck vial has a wide mouth and is convenient for automatic injection. Needle for pulling samples.

9mm thread caps, septums, 9mm 2ml HPlc screw vials are specifically designed for use with THERMO FISHER and other rotating or robotic arm samplers. 9mm2ml Hplc screw vials are manufactured in transparent glass, Type 1 Class A or Amber, Type 1 Class B borosilicate glass and contains a write patch for sample identification. Amber glass prevents exposure to UV light and protects sensitive samples.

2ml snap top HPLC vial is made of Type 1 borosilicate glass. 2ml Snap hplc Vials mouth is wider opening. So 2ml snap top HPLC vial is easier to fill and provides a larger target area for the autosampler needle. That is to say, the 2ml snap top HPLC vial can protect the needle.

2ml Snap Top HPLC Vial size is 11.6x32mm, which can compatible to most autosamplers, such as THERMO FISHER instrument. 2ml HPLC vial is available amber and clear glass. The bottom of vial is flat. It is convenient to put in autosampler. Aijiren supply 2ml snap top HPLC vial and pad in wholesale price. If the sample is scarce, 2ml snap top hplc vial can be used with micro-insert.

Aijiren’s Snap Vial is commonly used in HPLC analysis and is popular because of its convenient sealing. The glass of Aijiren snap vial is borosilicate hydrochloric acid glass that can hold samples and is not easy to change. The Cap of Snap Vial is Pe Cap, which is soft and easy to handle.

2ml crimp autosampler vial is depending on the filling volume. We differentiate between standard 2ml crimp autosampler vials and micro-vials which either have an interior or exterior volume reducing shape. Alternatively you can of course also use inserts to reduce the volume inside a vial, in order to create ideal conditions for sample removal. 2ml crimp autosampler vial with insert is larger and wider mouth than 9mm screw sample vial. 2ml crimp autosampler vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling.

As HPLC autosampler vial manufacturer, Aijiren supply 2ml clear crimp top hplc autosampelr vial in wholesale price. The price of 2ml clear crimp top hplc autosampler vial is the same to Amber autosampler vial. Before you buy it, Aijiren can supply free sample to test. Aijirne is a global supplier of analytical field and lab supplies with high quality, good service and favorable price. About 2ml clear crimp top hplc autosampler vail and septa , cap, you can ask Aijiren business manager. Welcome to inquiry.

2ml clear crimp top hplc autosampler vial is made of borosilicate glass. Comparing with 2ml amber crimp headspace vial, the 2ml clear crimp top hplc autosampler vial should be made by special process. The appearance of a clear and transparent 2ml crimp top sample hplc vial has attracted widespread attention. 2ml clear crimp top hplc autosampler vial is made by adding UV-absorbed metal oxides to the glass, while using the complementary effect of color, and then adding certain metals or their oxides to fade the colored glass. So in theory, the 2ml clear crimp top HPLC autosampler vial is a little expensive than Amber autosampler vial.

Amber Glass 8-425 is often used to contain light-sensitive samples. The high-quality borosilicate hydrochloric acid glass used by Aijiren ensures that 8-425 Glass Vial has strong high temperature and low temperature resistance, strong corrosion resistance, and can guarantee maximum damage A chemical reaction occurs with the sample. Aijiren provides logo customization service, you can customize your exclusive logo in the Write-on Area area.

Screw vials is the most used in 2ml Autosampler vials.It is suitable for THERMO FISHER and other rotary or robotic arm samplers. 40% larger than standard narrow opening vial, prevents syringe problems. The special thread design ensures a consistent seal. Graduated write-on marking spot area, measures 0.5, 1.0 and 1.5ml.The ever flat-bottomed guarantee consistent matching between vials and truly neck 8mm for Standard Glass insert.

Autosampler Vials for GC and HPLC are typically grouped according to the diameter of the vial, the height of the vial, and the thread finish. Both clear glass and amber glass are highly inert. Amber glass protects sensitive natural samples by avoiding exposure to UV rays. Vials are mainly used to inject samples from autosamplers. 2mL 8-425 vials are more commonly used, but are sold in multiple sizes. The autosampler needle penetrates the cap during injection and extracts the required sample fraction from the vial. Aijiren is proud to offer numerous vials for chromatography applications.

2ml amber snap autosampler vial is equipped with PP snap cap. Snap cap can be easy to take away. 2ml amber snap autosampler vial can be matched with various color of caps. 2ml amber snap autosampler vial caps bring more convenience to your inventory management.
2ml amber snap autosampler vial for lab chromatography analysis is also equipped with PTFE/Silicone Septa. This 2ml amber snap vial septa can total seal the vial. Aijiren has continued to improve septa to actively reduce leaching, chipping, blocking, pushing, stiffening, and adsorption issues.

2ml snap autosampler vial is mainly used in lab chromatography analysis. This 2ml snap top autosampler vial has some features: 1.Extremely high inertness: The inertness of the sample vial can reduce the peak variability of the analyte. 2. Consistent performance: Each batch of the sample vial has consistent performance, which saves you more time for troubleshooting and re-running samples. You can also cooperate with Micro-insert when the sample margin is small.

2ml snap autosampler vial is equipped with PP snap cap. Snap cap can be easy to take away. 2ml snap autosampler vial can be matched with various color of caps. 2ml snap autosampler vial caps bring more convenience to your inventory management. 2ml snap autosampler vial for lab chromatography analysis is also equipped with PTFE/Silicone Septa. This 2ml snap vial septa can total seal the vial. Aijiren has continued to improve septa to actively reduce leaching, chipping, blocking, pushing, stiffening, and adsorption issues.

The 2ml HPLC PP Vial and Cap provided by Aijiren is usually 9mm in diameter, because the 9mm HPLC Vial can match most HPLC Autosamplers on the market. The specification of the 2ml HPLC PP vial is 12x32mm, the opening is increased by 40%, and the standard capacity is 1.5ml. The Cap of the 2ml hplc pp vial is also made of PP. There are two types of open top and closed top. Many colors are available for customers to choose.

High quality Aijiren 9mm 2ml Screw vial for chromatography analysis, amber glass makes it compatible with sunscreen samples. The 0.3 ml clear glass micro-insert can be fixed in a 9mm 2ml HPLC Screw Vial, and the size of the inserted vial is 6*29mm. The conical bottom vial can save samples during the injection process. 9 mm wide open screw top cap for better needle injection.

Aijiren 2ml 9mm Screw HPLC Vial is very popular, because Screw threaded HPLC Vial is very convenient to use, whether it is for storing samples or for automatic injection, different sizes of caliber can also be applied to different brands and types of automatic injection The 2ml 9mm Screw HPLC Vial is the choice of most customers on the market.

2ml crimp sample vials are manufactured by 33 expansion borosilicate glass. Select 2ml crimp sample vials for light-sensitive samples. This vial is equipped 11mm aluminum cap and septa. Aijiren provides 2ml amber sample vial in clear-pack trays. 2ml autosampler vial is compatible with closures come in different colors, sizes, and septa materials. Aijiren offered 2ml crimp vial with a graduation patch. Possible identification errors are eliminated. Supporting use with inserts or already possessing a conical interior shape, maximum retrieval of contents to eliminate waste.

2ml Crimp HPLC Vial requires a relatively inexpensive painted aluminum crimp cap. When properly assembled, it will become the best seal for long-term storage. 2ml Crimp HPLC Vial with Cap needs to be used with crimper and cap opener. The crimp cap cannot be reused, it can only be used once.

All Aijiren HPLC vials are ideal for autosamplers and offer excellent chemical compatibility and ultra-cleanliness. 2ml Crimp HPLC Vial with Cap are the most commonly used gas sampling vials on the market today. Aijiren 2ml Crimp HPLC Vials are manufactured from Type 1 borosilicate glass, available in clear or amber. Excellent for long term storage. 2ml volume sample vial especially suitable for laboratory use. At the same time, some 2ml Crimp HPLC Vial bottoms are designed at the bottom, so they have a flat bottom and are compatible with automatic sampling devices.

The 18mm Screw Headspace with caps with electromagnetic screw seals used for CTC is novel in the headspace vial market dominated by crimping necks. Especially for magnetic caps that are difficult to crimp, screw caps are a convenient choice. 18mm Screw Headspace with caps with aluminum skirt and magnetic center plate, it is easy to crimp and remove the cap. 18mm headspace vial with cap is preferred for the following instruments: Shimadzu.
How to choose whether to buy the Headspace Vial with round bottom or flat bottom? The round bottom is stronger, so it is more resistant to the high pressure in the sample Vial during heating. In addition, the vial is easier to slide into the heating block when transported by the magnet. When the vial must run in the instrument with a slight downward trend, a flat bottom may be required.Select the correct Headspace Vial at the bottom and use modern instruments to prepare the entire experiment with highly repeatable samples for accurate analysis.

Aijiren’s 20ml crimp top headspace vials have two types of round bottom and flat bottom. Please check the instrument you are using before buying. Is the round bottom or flat bottom headspace vial suitable? Aijiren designed the 20ml crimp top headspace vials in order to be more Accurately use with your instrument. 20ml crimp top headspace vial has a very good seal and can be used for volatile samples, but it needs to be used with 20mm Hand Crimper to seal the vials, and when opening the lid, it needs to be sealed with 20mm Hand Decrimper. You can refer to Aijiren’s product page to purchase the matching Hand Crimper/Decrimper.The caliber of the 20ml crimp top headspace is 20mm. Before buying, you need to check the specifications carefully to prevent it from being used after purchase.

In headspace gas chromatography analysis, headspace GC vial play an important role. The quality of headspace vial is related to the success or failure of the experimental results. Aijiren headspace vial are made of borosilicate glass, with safe and stable characteristics.

Aijiren 13-425 glass vials with screw cap are customized products based on your experimental requirements for vial types, writing areas, logos and other individual parameters. Aijiren 13-425 glass vials with screw cap is fully compatible with SHIMADZU autosamplers. Compared to crimp top vials, 13-425 glass vial with screw cap can easily tighten the lid without the help of a tool. Polypropylene threaded cap with PTFE septa, can form a good seal on the vial, improve work efficiency.

4ml 13-425 hplc vial with screw cap is belong to HPLC autosampler vials. The classification of HPLC autosampler vials is generally done based on the diameter of the vial body, vial height, and thread finish. Clear glass and amber glass present similar inertness. 4ml 13-425 hplc vial with screw cap is compatible to SHIMADZU instrument. Autosampler needle pierces through the cap during injection and withdraws the required amounts of analyte from the sample vial.

4ml 13-425 HPLC vial with cap is used for chromatography system. In the experimental system, the automatic sample system has the high-tech innovation ability, can improve the productivity of the chemical laboratory, and achieve excellent results in efficiency, safety and replicability. Therefore, 4ml 13-425 HPLC vial is also of great concern.

If the reagent to be tested by the customer is very precious and the capacity of 2ml vial is too large, Aijiren 8-425 2ml Autosampler Vials can be used with different types of micro-insert. There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert. All three types of micro-insert can be adapted to 8-425 2ml Autosampler Vials.

Let me introduce the material of 8-425 2ml autosampler vials, 33 Expansion borosilicate glass USP Type I Class A made of clear vial, or 51 Expansion borosilicate glass USP Type I, Class B made of Amber vial.Our glass uses neutral borosilicate and low borosilicate, but our neutral borosilicate can reach the standard of high borosilicate, and our low borosilicate can reach the standard of neutral borosilicate. We use excellent raw materials to make 8-425 2ml autosampler vials.

8-425 2ml Autosampler Vials from Aijiren is 12*32mm,It is 40% wider than the ordinary vial opening, thus ensuring that the syringe of the autosampler can pierce the bottle smoothly without errors. 8-425 2ml autosampler vials neck Suitable for Shimadzu autosampler and other rotating or robotic arm samplers.