11-425 11mm Snap Glass Chromatography HPLC Sample Vial

Snap vial is manufactured from Type 1 borosalicate glass (Class A, 33 extended borosicate glass) and is available from transparent or scarlet, or polypropylene. Snap vial accepts both aluminum snap seal and polyethylene snap cap. Ideal for short-term storage. De-activation and MS authentication are also available.

Transparent, Type 1 Class A or Amber, Type 1 Class B, Aijiren viale made of borosicate glass
The Aijiren Viale has a standard calibrated write patch that is easy to fill and identify.
Snap caps used in Aijiren vial systems are a convenient replacement for aluminum seals.
Snap caps or aluminum seals ensure safe sealing of samples

Snap caps provide a secure seal that minimizes evaporation, even with volatile samples. Snap caps are often more convenient than crimp caps as they can easily be applied and removed by hand. An audible click ensures a secure seal has been formed and that the cap is correctly aligned. Snap/crimp vials can be closed with either snap caps or crimp caps.

  The 11mm snap vial is specially designed and produced to ensure that it is sealed and matched with Aijiren instruments without failure. Strictly monitor the standard operating procedures of the production process to meet the requirements of stable quality and full traceability.

Hplc Vials Septum
Red PTFE White Silicone Septum
Septum Size: 11*1mm

“Aijiren Vials manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B, borosilicate glass
Aijiren Vials have a standard graduated write-on patch for easy filling and identification
Snap caps used with the Aijiren Vial system are a convenient alternative to aluminum seals
Snap caps or aluminum seals ensure a secure seal for samples”

The 2ml snap autosampler vial is often used in conjunction with the automatic sampler. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass with a writable label for sample identification.

The snap vials are less prone to breakage during decapping because more glass is used in the neck of the vial. The snap seal neck finish is compatible with either crimp or snap seals and no special tools are required to remove the cap. These vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Snap Top 2ml HPLC Vials can accommodate 250uL Micro-inserts,The specifications of Micro-insert are 29*5.7mm, 31*5.7mm, and 31*6mm. You can choose Micro-insert according to your needs. This is more helpful for HPLC analysis of precious samples, which can save samples without causing waste.

The sample vial and caps have strict size standards and can be matched with various models of autosamplers such as Aijiren, Waters, Varian, and Shimadzu.

Aijiren 2ml 11mm Snap Ring HPLC Vials has a standard scale and writing area for easy filling and identification. 2ml 11mm Sanp Ring HPLC vial can be matched with most autosamplers on the market, such as Aijiren, Thermo Fisher, Shimadzu and other well-known brands.

• Widely used in HPLC applications, universally usable vials for almost autosamplers, include the one with robotic handing.
• Snap vials can be closed with either snap caps or crimp caps.
• Snap caps can be easy as push-on, pull-off by hand.
• Clear glass vials–made from USP Type I, Class A, 33Borosilicate Expansion glass
• Amber glass vials—made from USP Type 1 Class B, 51Borosilicate Glass.

11mm Crimp Neck Conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. 2ml clear glass vial with 0.3ml intergrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical.

Aijiren 2ml 11mm Snap Ring HPLC Vial is made of transparent type A type 1 or amber type B type 1 type B borosilicate glass. Amber glass can effectively block ultraviolet rays and protect sensitive samples from the volatilization caused by ultraviolet rays. Aijiren 2ml 11mm Snap Ring HPLC Vial has a standard scale and writing area for easy filling and identification.

“Aijiren Vials have a standard 11.6x32mm profile and are compatible with convenient 11mm snap cap or aluminum seal closures
The “Step” design ensures proper centering of limited volume inserts, eliminating missed injections
Aijiren Vials have a 40% larger opening than standard aluminum seal vials for easier sample filling and to reduce the chance of bent or broken needles during sampling”

Snap Cap vials Wide-mouth vials are easy to fill and provide a larger target area for the autosampler needle. Suitable for most autosamplers, it can hold 12x32mm sample bottle format, high-quality 33 expanded borosilicate transparent glass type 1 (type A) or 51A amber glass uniform, flat bottom ensures that Vial can stand stably on the desktop.

11mm Snap Top Closures are made of PP. The translucent Cap design allows users to see the fixed card slot. The inside of the Snap Cap has 4 protrusions for fixing in the lateral groove of the Vial Neck.

2ml Snap Top HPLC Vial is made of Type 1 borosilicate glass. Comparing with 9mm screw vial, this 2ml Snap Top HPLC Vial mouth is wider opening. So 2ml Snap Top HPLC Vial is easier to fill and provides a larger target area for the autosampler needle. That means, the 2ml Snap Top HPLC Vial can protect the needle.

Snap cap vials have standard 12×32 profiles compatible with 11mm snap caps or 11mm crimp closures. Snap caps can be easily pushed or pulled by hand. 11mm Gc Snap Top Cap with Ptfe Silicon Septum for 2ml Snap Vial, 11mm Gc Snap Top Cap with Ptfe Silicon Septum for 2ml Snap Vial in SupplierAijiren Technology Co., Ltd.

Aijiren’s Snap Top 2ml HPLC Vials for autosampler are constructed from type 33 and type 51 COE borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching.
By choosing Aijiren caps and septa, you provide your sample with a the best containment solution available.

Snap Vials are manufactured from Type 1 borosilicate glass(Class A, 33 expansion borosilicate glass), available in clear or amber, or from Polypropylene. Snap Vials accept both an Aluminum Snap Seal as well as a Polyethylene Snap Cap. Excellent for short-term storage. Deactivation, MS Certification is also available.

Due to the large amount of glass used in the vial neck, the snap seal vial is hard to break when the cap is removed. The neck finish of the snap seal is compatible with crimps and/or snap seals and does not require any special tools to remove the cap. These viars are recommended for short-term sample storage and non-volatile samples because seals are not as secure as crimp or thread seals.

The snap-on seal bottle produced by Aijiren is not easy to break during the opening process because more glass is used in the neck of the bottle. The snap-on seal neck is compatible with crimping and/or snap-on seals, and the cover can be removed without any special tools. It is recommended to use these vials for short-term sample storage and non-volatile samples, as their tightness is not as good as crimping or thread sealing.

Snap seal vials are less prone to breakage during decapping because more glass is used in the neck of the vial. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Polypropylene Snap Micro Vials can be used in most standard gas and liquid chromatography autosamplers. The conical interior ensures maximum retrieval of contents without the hassle of using removable liners.

• Widely used in HPLC applications, universally usable vials for almost autosamplers, include the one with robotic handing.
• Snap vials can be closed with either snap caps or crimp caps.
• Snap caps can be easy as push-on, pull-off by hand.
• Clear glass vials–made from USP Type I, Class A, 33Borosilicate Expansion glass
• Amber glass vials—made from USP Type 1 Class B, 51Borosilicate Glass.