pp screw cap

24-400 PP Screw Caps
with 15mm Centre Hole or Closed top
Color: White, Black, Red or Customized
Septa Material: PTFE / Silicone
Septa Size: 22*3mm
Compatible brands: Agilent, Dionex, Shimadzu, Tekmar, Thermo Scientific, Varian
Use for TOC, Purge and Trap System

9mm Blue Plastic Screw Caps is suitable for: 9mm Short Thread HPLC Vials
Caps Material: polypropylene, size: 11.5*6mm, inner diameter: 9mm, with 6mm Centre Hole or Closed-Top
Color: usually blue, other colors are also provided, such as red, black, yellow, etc
The Septa are PTFE / silicone, size: 9*1mm, the sapta could be pre-slit

Cap is manufactured in the most advanced molding equipment using high-purity pure polypropylene. PP complies with US FDA 21 CFR material. Used to store PCR reagents, enzymes and other diagnostic reagents, as well as biochemical reagents or samples. The HDPE screw cover is leak-proof. Can be used at low temperatures. Amber Storagr vials can be used for light-sensitive samples.

Polypropylene screw cap with septum-The polypropylene screw cap with septum provides an anti-evaporation seal. The double layer includes silicone and PTFE. The silicone septum can be injected multiple times. Screw caps lined with PTFE are used for organic samples. The screw cap provides an inert, air-tight seal and can be directly pierced through the sample with a syringe needle.

Hole Caps are available in phenolic or polypropylene. Phenolic hole caps are provided without a septa. Polypropylene hole caps are available preassembled with separate septa or without septa. We also feature polypropylene hole closures with bonded septa to provide assurance that the septa will not slip away from the cap while injecting.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.

Storage glassware manufactured in Type 1, Class A, 33 expansion borosilicate glass or 51A amber glass
Capacity ranges from 20mL to 60mL
Provide constant pH for duration of sample storage life
Chemically inert caps suitable for most chromatography and storage applications
Top grade PTFE/silicone septa used for cleanliness

Manufactured in state of the art moulding facility using high purity virgin polypropylene.
PP Material confirming to US FDA 21 CFR.
Used for storage of PCR reagents, enzymes and other diagnostics and biochemical reagents or sample.
HDPE screw closure is leak proof.
Can be used at low temprature.
Amber Storagr Vial can be used for light sensitive samples.

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability. Septa sold separately.

Aijiren’s screw PP cover for sample storage vial is made of high-quality polypropylene. The color is usually black and white. You can choose whether to have a cap with a center hole. A cap with a center hole will make it easier for the syringe to be in the vial. Inject the sample or withdraw the sample.

The screw caps produced by Aijiren can have an opening for the autosampler and standard additions, or they can have a solid top for storing samples. A polypropylene cap and film are also available. These pierceable screw caps are designed for one-time use, and because there are no caps and seals to assemble, the sample preparation time is reduced.

We provide the protection of PTFE and the resealing ability of silicone with our septa and seals to fit our autosampler crimp top vials. This seal includes a two sided PTFE septa with silicone in the center. Caps are made of high quality polypropylene, Caps have the profile of a crimp or snap closure for compatibility with robotic autosamplers, Pre-assembled septa reduces the chance of contamination during sample preparation, while saving sample preparation time in the lab.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

1. Septa and slit septa are available.
2. Normal Available cap color is Black, other special colors can be also produced.
3. Pre-assembled caps and septa are convenient and minimize contamination from handling.
4. Phenolic caps can be autoclaved.