DIN thread GL45, pouring ring , 1000ml Reagent Bottle

Discover top-quality clear borosilicate 3.3 reagent bottles with GL45 blue caps. Supplier offering 50ml to 2000ml sizes for laboratory needs.

Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, borosilicate or related substances with special caps on top. They are intended to hold chemicals in liquid or powder form for laboratory use and are stored in cabinets or on shelves. Some reagent bottles are amber (photochemical), brown or red to protect photosensitive compounds from visible, ultraviolet and infrared radiation that may alter them; when the side of the bottle is marked to indicate the approximate (usually with a 10% error) amount of liquid for a given level in the container, these bottles are called “graduated “. A reagent bottle is a type of laboratory glassware.

Some reagent bottles are tinted amber (actinic), brown or red to protect light-sensitive chemical compounds from visible light, ultraviolet and infrared radiation which may alter them; The bottles are called “graduated” when they have marks on the sides indicating the approximate (often with a 10% error) amount of liquid at a given level within the container. A reagent bottle is a type of laboratory glassware.?

When pouring hot liquids into a reagent bottle or placing the bottle in the refrigerator, the lid should be propped open with a toothpick or other small object until the liquid and bottle are cool. Another way to seal the bottle while preventing the lid from sticking is to place a sheet of plastic wrap loosely over the bottle neck before pushing the stopper down.

500ml reagent bottle refers to a type of laboratory container specifically designed for holding chemical reagents. It has a capacity of 500 milliliters, which is equivalent to half a liter or approximately 16.9 fluid ounces. Reagent bottles are typically made of glass or plastic and have a narrow neck with a screw cap or stopper to secure the contents and prevent spillage or contamination.

Aijiren reagent bottles provide unrivalled uniform wall thickness distribution.
Improved mechanical stability and resistance to temperature changes
Prevents the stress that occurs in the glass and the possibility of rupture during heating and cooling
Advantages: Improve employee safety, extend the service life of experimental glassware, and protect valuable substances.

Reagent bottle is a type of laboratory glassware used for storing and dispensing chemical reagents. It is designed to hold relatively small amounts of liquid reagents and is typically made of glass, although plastic reagent bottles are also available.
Reagent bottles have several distinctive features. They usually have a narrow neck and a wide base, which provides stability and prevents tipping. The neck of the bottle is often equipped with a screw cap or a ground glass stopper to provide a secure seal and prevent the evaporation or contamination of the reagent. The cap or stopper may also have a liner or seal to enhance the closure.

For consistent performance and better quality, Aijiren’s experimental bottles are widely used. Aijiren Reagent Bottles Aijiren Experimental Bottles are chemical-resistant and stable. When fitted with a plastic pouring ring, the dropping can be completely lost. There is only one size screw in every bottle after 100ml.

A low coefficient of thermal expansion (3.3), provides temperature resistance that is far superior to that of standard lab glass (or soda lime glass). Aijiren glass can withstand temperatures from -70 to 500°C, permitting repeated use in freezers, microwaves, autoclaves and dry heat sterilization chambers.

Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, plastic, borosilicate or related substances, and topped by special caps or stoppers. They are intended to contain chemicals in liquid or powder form for laboratories and stored in cabinets or on shelves.

The reagent bottle, also called the culture medium bottle or graduated bottle, is a container made of glass, borosilicate or related substances and covered with a special cap or stopper. They are intended to be used in the laboratory for chemicals in liquid or powder form and are stored in cabinets or shelves.

Measure laboratory media using the Aijiren? Reagent Borosilicate Glass Bottle with Cap. It conforms to ISO R1115 and DIN 168, is chemically resistant and can be repeatedly sterilized to 140¡ãC.