Wholesale Crimp Vial On Pack--Aijiren Vials for HPLC/GC

Perfectly match various autosamplers on the market. Crimp sample vials are available in transparent, amber, transparent with graduated writing, and amber with graduated writing for selection. The u...

Crimp Top Amber Vial In Stock

2ml / 1.5ml glass crimp vials with crimp seals for hplc autosampler
Crimp the caps to the vials with the hand crimper
100pcs per pack, aluminum caps with ptfe silicone septa, 100pcs per pack

11mm Crimp Seal Vial 2ml for Hplc Autosampler

crimp vial is compatible with all 2mL vial autosamplers, 2mL, 11.6x32mm.11X1mm Teflon/silicone septa, 11mm crimp top sample vials and micro-inner tubes, vapor/liquid vials

2ml autosampler vial, crimp neck, aluminum cap

Aijiren’s Crimp Top Vial has a standard 11.6x32mm shape and is compatible with 11mm aluminum sealing caps. The Aluminum Cap has a 5.5mm center hole to facilitate automatic sampling by the automatic sampling arm. Septa can also choose whether to pre-slit, which is convenient for automatic Sampling needle pierced Septa.

11mm Crimp Top Vials for WATERS

Aijiren sample vials have excellent sealing performance, which can effectively avoid sample evaporation. The sample bottle and corresponding 11 mm aluminum cap can be easily combined with the crimp cap tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for sample bottles with white open caps and thick PTFE/silicone septa, they can be used as anhydrous and oxygen-free reaction bottles.

Crimp Top Glass Sample Vial for WATERS

The characteristics of crimp vials are strict quality assurance, providing dimensional consistency between batches, optional ceramic writing points with filling marks, certified and fully compatible with autosamplers, PTFE/silicone/PTFE septum The pad has excellent core resistance, is compatible with a variety of autosamplers, and has good quality control, including height, diameter, bottom, thickness and neck/thread, cleanliness.

2ml Amber Glass Crimp Vials for WATERS

2ml crimp top vial from Aijiren is made of high-quality borosilicate hydrochloric acid glass, which can effectively prevent chemical substances from reacting with Vial to affect the results of the experiment. The glass of Vial has two colors, Clear and Amber, and customers can put it according to the claim The characteristics of the samples are selected.

Crimp Top HPLC Vial Suit for Water’s Autosampler

The 2ML HPLC Crimp Top Vial is very suitable for HPLC analysis, because it has good sealing properties and guarantees the same quality of samples. Crimp Top Vial should be used with Crimper and Decrimper. Crimp Top Vial of different calibers needs to be used with different Crimper and Decrimper. Aijiren provides high-quality Crimp Top Vial and Crimper&Decrimper, hoping to provide you with some convenience.

2ml Crimp Top Vials for Water Autosampler

Hplc Vials Septum
Red PTFE White Silicone Septum
Septum Size: 11*1mm

Red PTFE White Silicone Septum for 11mm hplc vials

Crimp-top vials are generally used in laboratories. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass, and a writable label is attached to the vial as needed f...

Clear Glass Crimp Neck Vial

High-Quality Vial - Clear vials made of low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements. This type of glass has a borosilicate structure. It ...

11mm Crimp Neck Vial

11mm crimp vial is a FDA ¡°white listed¡± materials,USP VI-certified compound. It can be resealed after multiple punctures. There is no flash or parting line. Various composite hardness testers are...

11mm Crimp Top Glass Vial

The crimp top provide the tightest seal, reducing the possibility of sample volatilization. The 12X32mm crimp vial and aluminum cap are the most economical choice, and it is also very convenient to use with the crimp tool.

2ml clear glass crimp vials, 11mm crimp neck

Autosampler vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large...

Crimp Vial On Pack

Aijiren’s chromatography vial has a wide-mouth crimp cap that provides a larger target area and improves the accuracy of the autosampler needle. The crimped vials with integrated micro inserts are made of transparent glass. Septa types: PTFE/silicone, natural rubber/TEF septa, single slit septa are available. The three-layer spacer of natural rubber/red butyl/TEF combines the good physical properties of Nat. Rubber with good butyl chemistry (resealability).

Chromatography Vial in Crimp Top for WATERS

The crimp type vial, bottom diameter is 11.6mm, the height is 32mm, the neck diameter is 11mm. Actual capacity 2mL, standard capacity 1.5mL

11mm crimp neck vial, amber glass, 2ml

The Crimp top Vial provided by Aijiren is suitable for Water’s Autosampler. The diameter of the Crimp top vial is 40% wider than the ordinary Vial, which is convenient for the in and out of the automatic injection needle. Aluminum Cap has good airtightness, non-volatile samples, and can be stored for a long time, making it your best choice for storing samples.

Waters ND11 Crimp Top HPLC Vial

Suitable for 11mm 2ml Crimp Neck Vials & 20mm Headspace GC Vials
Caps Material: Aluminum
Use Together with PTFE/Silicone Septa or Rubber Stopper
Color: Metal Silver
Vial Septa & Rubber Stopper and Crimpers are also Provided

Crimp-top Aluminum Caps with Centre Hole

Aijiren Crimp Top vials are very suitable for autosamplers, and crimp top vials are currently the most commonly used gas sampling vials on the market. The 2ml sample bottle is very suitable for laboratory use. It should be noted that the bottom of the Aijiren Crimp Top vial is designed as a flat bottom function and is compatible with automatic sampling equipment.

2ml Crimp Top Vials for WATERS