2ml 9mm Screw Neck Glass Vial

Our 9 mm Wide Mouth Vials and Closures are our recommended screw thread vials. These vials are autosampler compatible and offer a 40% larger opening than 8-425 thread vials, simplifying pipetting and other routine functions. Aijiren Tech offers 9 mm screw thread vials in clear and amber glass, as well as polymeric options and mass spec quality glass.

Aijiren’s 2ml Glass Vials can be applied in a wide range of fields. Many projects that require chromatographic analysis need to use 2ml Glass Vials, such as environmental analysis, soil analysis, pharmaceutical analysis, food analysis, etc. The aim of Aijiren is to provide high-quality chromatographic consumables for customers of chromatography.

These caps form an exceptionally tight seal and offer a good chemical barrier. This liner molds itself around the sealing areas of the finish as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, binding and backing off. Great for everything from liquids, to soaps, to macro-invertebrates.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

9mm Closures are formed by the combination of Cap and Septa. Screw Neck guarantees the tightness of 9mm Closures. Generally speaking, one end of PTFE faces the sample surface, because PTFE is highly inert and difficult to react with chemicals. Aijiren also supports separate orders for Cap and Septa.

Aijiren offer innovative high recovery vials for comprehensive collection, automated handling and storage, with the subsequent maximum retrieval of high value samples. 1.5ml 9mm high Recovery Vials Reduce Residual Product Waste by 99%.

The PP cap will puncture with far less force than needed to puncture a PTFE/Silicone septa, thus minimizing instrument wear and tear as well as downtime. The septa are not resealable and are intended for single use.

Polypropylene caps are known for good impact strength, cost effectiveness, and pliability. They can be remelted after they are formed. Aijiren Polypropylene cap is widely used in chromatography analysis.

The China 0.3ml, 9mm, Clear or Amber, Polypropylene Micro Vial is available in disposable and sterile options, catering to different laboratory needs. The disposable vials offer convenience and eliminate the need for cleaning or sterilization, saving valuable time and resources. The sterile vials are pre-sterilized, ensuring contamination-free sample storage and reducing the risk of experimental errors or cross-contamination.

The 9mm 1.5mL Autosampler Vial is a versatile vial designed for precision sample handling in laboratory settings. With a 9mm diameter, it offers a universal fit in most autosamplers, ensuring compatibility with various systems. The vial has a capacity of 1.5mL, providing ample space for storing and transporting small liquid samples with ease.

1.5 ml vials from Aijiren Technology, Inc with high quality and favorable price. Zhejiang Aijiren is a manufacturer of Laboratory consumables. We supply autosampler vials, septa and caps at factory price. 9mm Short Thread Vials ND9 can be used for GC and HPLC.

2mL Clear Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vial, the product material is of paramount importance.

Although most laboratories have switched to 9 mm screw thread vials for a wider opening while still being autosampler compatible, some labs use 8-425 vials for storing solvents. The standard opening 8-425 vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.

These vials are a good choice for the latest autosamplers. With an emphasis on improving sample security and integrity, we offer innovative 9mm closures and 9mm screw top vials for consistent productivity across all separations.
Standard opening screwed viars are manufactured from borosicate glass and the maximum filling volume is 2 ml.

Aijiren 9-425 HPLC Vial can choose the type with writing area and scale for easy filling and identification of samples. Aijiren 9-425 sample vials can be used with the robotic arm autosampler. The opening of the 9mm sample vial is 40% larger than that of ordinary vials to facilitate sample preparation. The Aijiren 9-425 sample vial must be used together with the 9mm screw pp bottle cap. Ensure proper fit and function.

Aijiren strongly recommends to use only ready-made sealing caps, whose lining matches the bottle cap completely, and has been automatically inserted under strict sanitary conditions.

This complete HPLC vial kit includes everything you need: 100 pieces of 2mL clear glass vials with an integrated volume scale and 100 matching blue 9-425 thread caps.
Designed for leak-proof sealing and universal instrument compatibility, this set delivers excellent value and convenience for daily chromatography use.

High recovery vials are optimal for manual and automated compound or biological sample applications. High Recovery Vials allow maximum sample extraction without need for separate inserts

Screw cap vials are universal. When screwing on the cap, a mechanical force is applied that compresses the septum between the rim of the vial and the cap. Screw closures provide an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.

The non-pre-slit septas help to reduce carryover from vial to vial because the resealing characteristics of the septum act as a squeegee to wipe solution from the outside of the needle. Typically, a non-slit septum exhibits resealing capabilities for a limited number of needle punctures but for long-term storage in the vial, using a new non-punctured septum is best practice.

1.5ml 9mm Screw Neck Vial for automatic samplers is made of low metal type 33 and 51 COE borate glass to prevent sample instability or leaching. By selecting the cap and pad, we provide the best sealing solution for the sample.

The Lab 9mm 2ml Screw Top HPLC Autosampler Vial features a precision-engineered design, ensuring a secure and leak-proof seal. It is compatible with various autosamplers, making it a versatile choice for HPLC applications.

Aijiren is a supplier of 2ml 9mm Screw HPLC Vials. Our factory specializes in the production of vials for chromatography. We use good raw materials to make vials and sell them at a cheap price while ensuring quality.
The 2ml 9mm Screw HPLC Vials provided by Aijiren can be added with a writing area, which is convenient for customers to mark
samples during experiments and to distinguish samples. Aijiren’s 2ml 9mm Screw HPLC Vials also accept logo customization. If
the customer needs, we can print the customer’s brand logo on the vial. We provide customized services to facilitate customer needs. If you need 2ml 9mm Screw HPLC Vials or customized service, please contact us.

Chromatography vials are widely used in chromatography, chemistry, medical and other fields. Autosampler vials are generally made of hydrolytic glass or borosilicate, with various specifications. Different vial mouth designs meet different actual needs

The staff in the picture is disassembling the assembled 9mm Screw Neck Cap with Septa. These are 9mm Screw Neck Closures randomly selected from different machines. Since Aijiren produces more machines, many samples need to be checked. Solution to check whether Septa and Cap are damaged, if they are not sturdy, Septa may fall off or fall off easily. Aijiren’s strict quality inspection guarantees the quality of the product.

Achieve faster workflow and greater convenience with our 2mL glass autosampler vials featuring a permanently printed volume scale.
The clear and accurate markings (0.5, 1.0, 1.5mL) allow instant visual sample assessment, reducing measurement time and improving analytical precision.

The 9mm high recycling vial is a new vial specially designed by Aijiren for precious samples in the laboratory. Many times the autosampler will leave sample residue in the vial when it is injecting samples. If the sample is precious, this residue is undoubtedly a waste. High-recovery vials can avoid this problem.

The aijiren chromatography sample vial is made of borosilicate glass and meets ASTM TYPE I ClassA and USP TYPE I standards.
There are four types: colorless and amber vial, handwriting area and no handwriting area.