11mm Crimp Aluminum Cap for HPLC Autosampler

PTFE/Silicone/PTFE septum provides excellent resistance to core rings
Wide range of autosamplers
Good quality control such as height, diameter, bottom, thickness, neck/thread, cleanliness, etc.
Consistent quality across batches

The Aijiren sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw-capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

Crimp closures N11 are also universally suitable with regard to autosampler compatibility, however, they are not as safe and convenient in their closing technique as the screw closures N 9 (9mm) 2ml vials and closures.

crimp vial is compatible with all 2mL vial autosamplers, 2mL, 11.6x32mm.11X1mm Teflon/silicone septa, 11mm crimp top sample vials and micro-inner tubes, vapor/liquid vials

Hplc Vials Septum
Red PTFE White Silicone Septum
Septum Size: 11*1mm

Use Aijiren?11 mm Glass Crimp Top Vials with aluminum crimp seal closures. These high-quality 11 mm glass vials are 2 mL, 12 x 32 mm and fit most brands of autosamplers. Made of superior quality 33 expansion borosilicate clear (Type 1, Class A), they meet all requirements of US, EU, JPN Pharmacopia. Choose from Aijiren brands.

0.3 ml clear glass micro insert fixed in 2ml glass vial. Conical base micro  insert vial can saving samples while during injection.  Wide opening top for better needle injection.

All of Aijiren 2ml vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

The function of crimping top sample vials, Strict quality assurance provides dimensional consistency between batches, Optional ceramic write points with filling marks, Certified and fully compatible with autosampler.

The Aijiren sample vial is sealed and effectively avoids sample evaporation. The 11 mm aluminum cap corresponding to the vial can be easily and quickly combined with the jaw capping tool. Vials can withstand heat and pressure and can also be used for chemical reactions. It can be used as an anesthermal and oxygen-free reaction viale, especially for white open caps and thick PTFE/silicon septum viars.

Autosampler vials are generally made of hydrolytic glass or borosilicate, with various specifications. Different bottle mouth designs meet different actual needs. The 1.5ml 11mm crimp-top autosampler vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use.

The neck finish of 2ml Crimp Vial allows the use of standard aluminum seals. Surface treatment eliminates the need for crimping or capping. Designed for use in autosamplers. Choose from clear or amber type I borosilicate glass. The ID design combines the StepVial function, which can accurately center the limited volume of the insert on the bottleneck of the sample. A scaled marking point can be provided.

Crimp Caps squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The crimp cap vial requires crimping tools to carry out the sealing process.

Features of 11mm 2ml crimping top sample vials: Strict quality assurance provides dimensional consistency between batches, optional ceramic writing points with filling marks, certified, and fully compatible with autosample

The aluminum caps produced by Aijiren are all high-quality, and it is easy to wrap the Vial caliber to form a sealed space under the hand crimper. The 5.5mm center hole also ensures easy sampling of the autosampler.

Features of the Crimp Top Sample Vial
Rigorous quality assurance ensures consistency of dimensions between lots
Optional ceramic writing spot with fill mark
Full warranty compatibility certification with autosampler

HPLC autosampler vials  are generally categorized by vial diameter, vial height, and thread finish. Clear glass and amber glass have similar inert properties. Amber glass is used to protect sensitive samples from UV light. Markings on the vials provide sample identification information. Autosampler vials can be used to inject samples from an autosampler.

PTFE is the most inert but its poor resealability making it unsuitable for multiple injections or storage. For layered septa such as PTFE/silicone the chemical resistance of the septa is that of PTFE until the septum is punctured. Once punctured, the silicone layer is exposed and able to react with sample/solvent so the chemical resistance of silicone should be considered when using these septa.

All Aijiren 11mm Crimp HPLC Vials are ideal for autosamplers and offer excellent chemical compatibility and ultra-cleanlines.
The 11mm Crimp Vial provided by Aijiren is well sealed and suitable for storing samples. It needs to be used with Decrimper and Crimper.

HPLC autosampler vials are generally categorized based on vial diameter, vial height, and thread finish. Clear glass and amber glass have similar inert properties. Amber glass is used to protect sensitive samples from UV light. Markings on the vials help provide sample identification information. Autosampler vials can be used to inject samples from an autosampler.

Aijiren Crimp Top vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, it has a flat bottoming function and compatibility with automatic sampling equipment.

Crimp vial is manufactured from type 1 borosicate glass, or polypropylene, available in transparent or scarlet. I need a clamper and a decapper. Ideal for long-term storage. De-activation and MS certification are also available.

11mm vials for GC and HPLC. Vials have a 40% larger opening than standard opening aluminum seal vials. Crimp vials are manufactured of Clear or Amber borosilicate glass.

Chromatography sample vial is a glass vial used by automatic samplers and headspace samplers such as liquid chromatography, gas chromatography, mass spectrometry, etc. for chromatographic automatic sampling. Its basic requirements are accurate volume, ability to withstand a certain pressure, good sealing performance, and no adsorption to samples.

Polypropylene Snap Micro Vials can be used in most standard gas and liquid chromatography autosamplers. The conical interior ensures maximum retrieval of contents without the hassle of using removable liners.