100ml 250ml 500ml 1000ml Reagent Bottles

Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, plastic, borosilicate or related substances, and topped by special caps or stoppers. They are intended to contain chemicals in liquid or powder form for laboratories and stored in cabinets or on shelves.
Vials and closures listed in this section are designed, engineered, and manufactured for optimum performance with HPLC and LC/MS applications. A great deal of energy, money, and time can be spent on sample preparation. The last thing you need is for a sample vial to contribute to contamination resulting in complicated data interpretation or complete reanalysis. By using certified vials that are nearly contaminant free, you can reduce the risk significantly by using vial products made specifically for these applications.

The Clear Reagent Bottle 250ml is widely used in research laboratories, educational institutions, pharmaceutical companies, and industrial settings. It is commonly employed for storing and dispensing reagents, chemicals, solvents, and other liquid substances. Its versatility and reliable performance make it an essential tool for scientists, researchers, and professionals working in various scientific fields.

Bottles and screw caps can be autoclaved / sterilized. Made from borosilicate glass helps prevent changes in ph levels and maintain content purity. Non-slip coating allows for greater ease and stability when handling wet or dry. 45mm white polypropylene unlined screw cap comes attached to bottle to help maintain cleanliness. Pvc-based plastisol coats exterior of bottle retaining contents if bottle is accidentally broken.

Discover top-quality GL80 Wide Mouth Lab Glass Media Storage Bottles, 250ml, from a reliable supplier. Secure your lab’s media storage needs efficiently!

When pouring hot liquids into a reagent bottle or placing the bottle in the refrigerator, the lid should be propped open with a toothpick or other small object until the liquid and bottle are cool. Another way to seal the bottle while preventing the lid from sticking is to place a sheet of plastic wrap loosely over the bottle neck before pushing the stopper down.

Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, plastic, borosilicate or related substances, and topped by special caps or stoppers. They are intended to contain chemicals in liquid or powder form for laboratories and stored in cabinets or on shelves.

Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, borosilicate or related substances with special caps on top. They are intended to hold chemicals in liquid or powder form for laboratory use and are stored in cabinets or on shelves. Some reagent bottles are amber (photochemical), brown or red to protect photosensitive compounds from visible, ultraviolet and infrared radiation that may alter them; when the side of the bottle is marked to indicate the approximate (usually with a 10% error) amount of liquid for a given level in the container, these bottles are called “graduated “. A reagent bottle is a type of laboratory glassware.

With a large enough change in temperature, the neck of the bottle can actually crack if it shrinks too tight around the stopper. Additionally, if hot liquid is poured in the bottle, the liquid will form an air-tight seal between the stopper and bottle and as the liquid and steam in the bottle cool and shrink, the stopper will be pulled down into the bottle neck.? This is the same principle that makes the center of a canning jar lid pop down until the seal is released.

The reagent bottle can withstand a low coefficient of thermal expansion (3.3), and its heat resistance is far better than standard laboratory glass (or soda lime glass). Aijiren glass can withstand temperatures from -70 to 500°C, so it can be reused in freezers, microwave ovens, autoclaves and dry heat sterilizers.

Some reagent bottles are tinted amber (actinic), brown or red to protect light-sensitive chemical compounds from visible light, ultraviolet and infrared radiation which may alter them; The bottles are called “graduated” when they have marks on the sides indicating the approximate (often with a 10% error) amount of liquid at a given level within the container. A reagent bottle is a type of laboratory glassware.?

For consistent performance and better quality, Aijiren’s experimental bottles are widely used. Aijiren Reagent Bottles Aijiren Experimental Bottles are chemical-resistant and stable. When fitted with a plastic pouring ring, the dropping can be completely lost. There is only one size screw in every bottle after 100ml.

Reagent bottle, also known as culture medium bottle or scale bottle, is a container made of glass, borosilicate or related substances, with a special cover on the top. They are designed to contain chemicals in the form of liquid or powder for laboratory use and are stored on cabinets or shelves. Some reagent bottles are amber (photochemical), brown or red to protect photosensitive compounds from visible, ultraviolet and infrared radiation, which may change them; Bottles are called “graded” when they are marked on the side to indicate the approximate (usually 10% error) amount of liquid at a given level in the container. Reagent bottle is a kind of laboratory glassware.

This Reagent Bottle is made from borosilicate glass and is great for containing liquids and powders. Featuring a white wadded screw cap, it ensures that chemicals are safely stored on shelves or in a cabinet. This bottle has a 100ml capacity and is ideal for use in the science classroom or laboratory.

Material: high quality, borosilicate glass
Color: clear & amber
Capacity: 500ml
Cap: DIN thread GL45, pouring ring
Permanent white enamel graduations markings

The blue cap reagent bottle produced by Aijiren, with graduations, with O-shaped anti-drip ring; low thermal expansion coefficient, can be repeatedly autoclaved; 100ml / 250ml / 500ml / 1L multiple specifications optional, chemical resistance, high temperature and high pressure , No dripping. Borosilicate 3.3 glass material, in line with USP EP first-class glass.