Aijiren’s HPLC and GC Glass Vials

Aijiren has always insisted on using high-quality glass, because only the quality of the glass is high enough to be compatible with more samples and more convenient for customers to experiment. Therefore, Aijiren decided on borosilicate glass after various comparisons. This glass is not only resistant to high temperature and corrosion It is also inert and not easily broken, which is very suitable for large-capacity 60ml sample storage vial.

The label area of 2ml Clear Glass HPLC Vial is very useful. For example, when a control experiment is needed, different reagents need to be stored in the same 2ml Clear Glass HPLC Vial. At this time, you need to mark the label area to distinguish Two bottles of reagents. Generally speaking, the label area also has a scale, which can show the liquid level in the vial.

The 4ml transparent threaded sample vial (13-425) is suitable for Aijiren , Aijiren and Aijiren autosamplers. It can also be used for Perkin-Elmer Autosystem GC, Waters 48-position sample tray autosampler, Shimadzu AOC- 14/1400, Shimadzu LC-10A and SIL-2AS autosampler, used as chromatographic sample bottle and washing bottle. Produced/packed in an ultra-clean working environment. Use with perforated cap: autosampler, used as chromatographic sample?vial?and washing?vial. With solid cap Uses: used for sample storage vials.

Aijiren 2ml 11mm Snap Ring HPLC Vials has a standard scale and writing area for easy filling and identification. 2ml 11mm Sanp Ring HPLC vial can be matched with most autosamplers on the market, such as Aijiren, Thermo Fisher, Shimadzu and other well-known brands.

Mainly used in the following aspects: HPLC sample preparation; conventional QC analysis; content uniformity; removal of protein precipitates; dissolution test; food analysis; biofuel analysis; environmental samples

The crimp type vial, bottom diameter is 11.6mm, the height is 32mm, the neck diameter is 11mm. Actual capacity 2mL, standard capacity 1.5mL

The material of 0.3ml Snap Neck Vials produced by Aijiren is made of PP. This material guarantees strong inertness and is not easy to react with different types of chemical reagents. These all meet Aijiren’s purpose of producing PP Snap Vials.

Aijiren’s 9mm Screw Top Vial has very strict production standards. During production, the factory’s inspection department will select unqualified vials very strictly. From production to packaging to transportation, Aijiren will work hard to ensure that customers take every step. The products obtained are of high quality.

The Aijiren sample vial is sealed and effectively avoids sample evaporation. The 11 mm aluminum cap corresponding to the vial can be easily and quickly combined with the jaw capping tool. Vials can withstand heat and pressure and can also be used for chemical reactions. It can be used as an anesthermal and oxygen-free reaction viale, especially for white open caps and thick PTFE/silicon septum viars.

Aijiren produces 2ml autosampler vial, headspace vial, sample storage vial, etc., in two colors, clear and amber. Amber has a light-shielding function, which can isolate ultraviolet rays and protect samples. Aijiren is made of high-quality borosilicate hydrochloric acid glass, the cap is made of polypropylene, and the septa is made of silicone and ptfe to ensure the sealing and quality of the vial.

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

9mm Screw Neck Closures-Polypropylene Screw Cap with two-layer material compound Septa can provide anti-evaporation seal. The double layer includes Silicone and PTFE. This compounded Septa can be used for multiple injections. And it is matched with a PTFE lined screw cap for organic samples. The screw cap provides an inert, air-tight seal and the use of a syringe needle to directly penetrate the sample.

PTFE Syringe Filters are universal filters that are inert to a wide variety of aggressive solvents and strong acids and bases. These syringe filters can also be exposed to high temperatures and are an excellent choice for HPLC sample preparation. We offer PTFE syringe filters in both their hydrophobic and hydrophilic states.

Syringe filter is a small, disposable device used for filtration purposes in laboratories and other scientific settings. It consists of a plastic housing with a membrane filter at one end and a female luer lock or male luer slip connection at the other end, allowing it to be attached to a syringe.
The purpose of a syringe filter is to remove impurities, particulates, or unwanted substances from a liquid sample before it is injected or analyzed. The membrane filter within the syringe filter acts as a barrier, selectively allowing only certain particles or molecules to pass through while retaining larger particles.

Storage Vial is supplied by Aijiren. These vials are pre-sterilized and have a capacity of 5ml. These vials can be used for storing biological material, human and animal cells. The cap is provided with a built-in seal ring which makes the vial leakproof. The base of the vial has longitudinal grooves which gives it a non-twisting character when placed in a vial rack.

As a factory specializing in the production of chromatographic consumables, Aijiren has hundreds of workers for production, especially Septa. Aijiren has exclusive septa composite technology, so the requirements for the workers in the septa workshop are very high. The workers in the picture are using cutting machines for Silicone and PTFE composite material for cutting work.

The vial cap is made of high-quality polypropylene, and the septum is made of the highest-quality materials. The precise manufacturing tolerances and the controllable manufacturing environment ensure the high efficiency of product functions.

A crimping tool is required to seal caps. Several types of hand crimpers are available including the adjustable precision crimpers that Chromatographic Specialties offers.

A crimping tool is required to seal caps and a decrimper or decapper is required to remove the seals. Several types of hand crimpers are available including the adjustable precision crimpers that Chromatographic Specialties offers. Adjustable hand crimpers feature an adjustable stop on the handle to provide consistent seal tightness every time. Adjusting the hex screw inside the steel crimper jaws will also alter the amount of crimp. Achieving a good crimp is crucial because overcrimping can cause septum coring, bent needles and create a larger loose seals and sample evaporation.

The metal cover provides the widest temperature tolerance range and is very resistant to impact cracking. The metal cover is very suitable for gas chromatography applications. The metal cover is made of steel (chrome-plated or tinplate anti-corrosion coating) or aluminum.

Bottles typically come in two colors: clear and amber. Clear bottles are ideal for displaying items and amber bottles protect the contents from light. Sizes range from 30 ml (1 ounce) up to 20000 ml (about 5 gallons) and the larger ones may be used to store preserved biological specimens in the lab. The large ones also make excellent terrariums or miniature aquariums.

Standard vials for GC and HPLC,small caliber, 8-425 standard screw thread , It is suitable for autosampler and sample storage. It can be used with matched septa. 8-425 autosampler vial always be applied to Shimadzu, Spectra-Physics, Varian, and other autosampler. The clear one is made of USP type 1.

The snap-on sample bottle is made of Type 1 borosilicate glass (Grade A, 33 expanded borosilicate glass), with transparent or amber color, or made of polypropylene. The snap vial can accept either aluminum snap seal or polyethylene snap cap. Very suitable for short-term storage. You can also deactivate MS authentication.

Hole Caps are available in phenolic or polypropylene. Phenolic hole caps are provided without a septa. Polypropylene hole caps are available preassembled with separate septa or without septa. We also feature polypropylene hole closures with bonded septa to provide assurance that the septa will not slip away from the cap while injecting.

2ml screw autosampler vial refers to a specific type of vial used in laboratories for the storage and analysis of samples. It is designed to be compatible with autosamplers, which are automated instruments used for sample handling and injection into analytical instruments such as gas chromatographs (GC) and liquid chromatographs (LC).
The “2ml” refers to the vial’s nominal volume, which is 2 milliliters. This volume indicates the maximum capacity of the vial. The vial typically has clear glass or sometimes amber glass construction, allowing for visibility of the sample contents. The vial is cylindrical in shape with a screw thread on the outer surface of the neck.

Chromatography sample vial is a glass vial used by automatic samplers and headspace samplers such as liquid chromatography, gas chromatography, mass spectrometry, etc. for chromatographic automatic sampling. Its basic requirements are accurate volume, ability to withstand a certain pressure, good sealing performance, and no adsorption to samples.